(RUMBLER) REPAIR KITS
If you use a Rumbler, there's a Pegasus Kit designed to keep the gritted
peeling surfaces of your equipment in peak condition at all times. They're
designed for the waste-free repair of a worn patch, a base plate, or a
full Rumbler, as required. A Pegasus Kit means one less expensive servicing
SHOULD I USE A PEGASUS KIT?
- Kits use
MiniMixes - small, accurate, easy to make mixes, avoiding waste even
for small patches.
- Kits contain
enough material for a full Rumbler - you choose to patch or fully recoat,
material keeps until the next job. Kits have been successfully re-used
for many years.
worn base plate 'humps' can be built up & shaped for extra strength,
last at least a year, usually three or four if well applied, before
minor, repairable wear occurs.
- Kits are
self contained, easy to use & make Rumbler repairs part of normal
are completed within 24 hours, just peel extra potatoes the day before.
is not difficult. Take parts to a local shot-blasting company (best).
Use an angle-grinder (borrow or ask local garage) (next best). Use a
drill with abrasive disc or wheel or a wire brush.
- All Pegasus
Kits are designed & manufactured in-house.
- Just call
us for any technical backup.
I USE IT?
Rumbler parts. Prepare surface for coating by shot blaster, angle grinder
- Mix Bonding
Agent & Hardener and add Thickener. (All by Measures) Brush on evenly.
build-up is required (e.g. base plate 'humps') add grit & use trowel
or spreader to shape.
Ceramic Grit. Ensure evenness.
Approx 4 hr at 20 ºC+ to 16 hr at 5 ºC. Placing in warm area
KIT DO I NEED?
(1) Small Rumblers (28lb) need the Small Rumbler Kit RUM/11.
(2) Large Rumblers (56lb) need the Large Rumbler Kit RUM/12.
The Small Kits are supplied with medium Ceramic Grit for normal peeling
speed. Large Kits are supplied with Coarse Ceramic Grit for higher peeling
speed. Please specify any change required.