ANTI-SLIP
PRODUCTS - NO-SLIP RANGE
Pegasus NO-SLIP Kits let the user apply safe, anti-slip surfaces to slippery,
unsafe areas. Metal, wood, concrete, brick etc...no problem! Our ONECOAT
No-Slip kit keeps downtime to a minimum and is still simple to use. Conditions
of use can vary widely, from Bare Feet to Boots & Tyres on heavy oil
contamination. NO-SLIP cures down to below 5ºC - it just takes a
bit longer - usually overnight.
This Datasheet shows how to choose the correct kit. Surface texture can
be widely adjusted by correct choice & application density of Grit.
Rough, cold, absorbent surfaces use much more material than smooth, warm
ones. We're always available in more difficult cases to discuss requirements
and correct choice of kit, to ensure that the surface finish is just right.
|
|
|
|
|
WHY
SHOULD I USE A PEGASUS NO-SLIP KIT?
|
- NO-SLIP
produces a hard wearing, long lasting, slip-resistant surface, even
under oil & grease spills.
- NO-SLIP
can be used on most surfaces, including some existing coatings, with
correct preparation.
- NO-SLIP
uses MiniMixes - small accurate, easy to make mixes, avoiding waste,
even for small areas.
- NO-SLIP
unused material keeps for at least a year, usually several, allowing
use as & when needed.
- NO-SLIP
surface texture can be easily adjusted, to allow one kit to handle several
very different jobs.
- NO-SLIP
Kits can have larger sizes of MiniMix Measures & different sizes
of grit included for even more applications.
- NO-SLIP
Kits are self-contained, easy to use, & fit into the normal planned
maintenance schedule.
- NO-SLIP
is available in a wide range of ONECOAT (4-7hr) Kits.
- NO-SLIP
is still available in STANDARD (Two Coat) Kits.
- NO-SLIP
is applied by brush or by roller for bigger areas, & can be 'built
up' for areas of severe usage.
- NO-SLIP
can be selectively over painted or sprayed to provide, for example,
Hazard Lines.
- We design
& make all our kits so who better for technical backup? Just call
Pegasus!
|
WHERE
IS NO-SLIP USED AT PRESENT?
Wooden steps & walkways; Stair nosings; Ramps; Loading bays; Metal mezanine
floors; Worn metal 'chequer' plate (e.g. steps, fire escapes, tail-lifts);
Surfaces which become oily, or slippery when wet; Areas & steps on or
around large machines where access is required; Areas where improved disabled
access is needed; Motor Cycle garages to make MOT Brake Testing areas; On
decks & tailgates of vehicles which become
wet & slippery in use, e.g. car transporters, removal vans and where
pallet-movers are used. |
HOW DO I USE NO-SLIP
|
- Clean
Surface.
- Mix Bonding
Agent & Hardener and add Thickener. Brush on evenly.
- Apply
Ceramic Grit. Ensure evenness.
- Cure 4
- 16 hrs dependant on temperature.
- Back in
use.
|
|
|
|
|
|
PRODUCT
LIST
Product
Name
|
Kit
Size
|
Coverage
(Square Metres)
Substrate Texture
|
Downtime
(Hours)
|
Product
Code
|
|
|
Smooth
|
Medium
|
Rough
|
-20°C
|
-5°C
|
|
|
|
|
|
|
|
|
|
NO-SLIP
ONECOAT |
medium
|
5/7
|
4/5
|
2/4
|
4-7
|
10-16
|
NS/11
|
|
|
|
|
|
|
|
|
NO-SLIP
ONECOAT |
large
|
10/13
|
8/11
|
4/8
|
4-7
|
10-16
|
NS/12
|
|
|
|
|
|
|
|
|
NO-SLIP
ONECOAT |
ex
large
|
15/20
|
12/16
|
6/12
|
4-7
|
10-16
|
NS/13
|
|
|
|
|
|
|
|
|
NO-SLIP
ONECOAT |
55kg
|
30/40
|
24/32
|
12/24
|
4-7
|
10-16
|
NS/13A
|
|
|
|
|
|
|
|
|
NO-SLIP
ONECOAT |
83kg
|
45/60
|
36/48
|
18/36
|
4-7
|
10-16
|
NS/14
|
|
|
|
|
|
|
|
|
NO-SLIP-P |
Plate
|
24"
x 4.75" x 3mm Aluminium
|
None
|
NSP/1
|
|
|
|
|
|
|
|
|
NO-SLIP-P |
Plate
|
24"
x 4.75" x 4mm Plywood
|
None
|
NSP/2
|
(All
Kits are supplied as Black with Medium Grit. For Fine or Coarse Grit /F
or/C is added to the Product Code. For other colours (to order) add W
= White; BR = Brown; R = Red; G = Grey.)
|
|
PLEASE
USE THESE NOTES IN CONJUNCTION WITH THE TABLE
|
|
- Examples
of surfaces classified as 'smooth', 'medium', 'rough' (above):
|
- Smooth
- smooth, non porous surfaces, mainly metals.
- Medium
- fairly smooth, slightly porous surfaces e.g. planed timber.
- Rough
- trowelled concrete.
(Rougher or pitted surfaces can use larger quantities. Smoothing out
first with our Concrete Filler will reduce cost. This can be incorporated
into the kit.)
|
- Coarse
grit will slightly reduce the areas given in the above table for standard
kits.
- Typical
coverage's (above) apply between 60 & 700F (16-200C), & can
only be used as a guide. As the temperature drops materials thicken.
Areas coated will fall unless precautions are taken, e.g. warming chemicals
and surfaces.
- Coverage
and brush ability of 'ONECOAT' can be partially adjusted for temperature
by modifying the thickener level.
- Pre-coated
plates are supplied drilled and countersunk ready for bolting or screwing
into position. Special sizes can be made to order.
- Please
ask for different Colours & Special or Modified products for non-standard
uses. We try to help!
|